When turning the car, the central part that causes the motion is the steering wheel you turn for the vehicle to turn. If you turn the steering wheel in any direction, it will automatically turn since it works with the wheel.
Sometimes, depending on the 2011 Hyundai Sonata, there will be a clicking noise that causes you to worry about what is causing the noise. If you hear such noises, the most common problem is with the parts of the car.
Therefore, you need first to find a way of checking for the causes of the noise in your car by inspecting the areas the noise is coming from. After reviewing the sites, you find ways of working with the parts since, in most cases, it can be because the areas have some faults or they are old that you need to replace them for the system to work. You can ask a professional to work with your car by checking the errors and fixing them if you do not have time to replace the parts.
It is time for you to focus on other things instead of the stress from the car’s noise when turning that you are not comfortable with using. The article below contains some possible causes of the clicking noise when turning the vehicle and how you can fix them. There are the frequently asked questions and lastly, the conclusion, which sums up the guide.
How to fix the clicking noise in the 2011 Hyundai sonata when turning
When turning, clicking noise in any vehicle results from faults within the car parts that you need to fix to reduce the noise; when selecting the noise, it is good first to identify the causes of the noise to help you work with the system with ease. First, read the manufacturer’s instructions on how to fix problems with the car before following the steps below:
Tools necessary
- Protective gloves.
- Hammer.
- New bolts.
- A screwdriver.
- A wrench.
- New replacement parts, among others.
i. Please switch off the car’s ignition to avoid touching the vehicle’s electrical parts when the engine is on since it causes some injuries to the car user; ensure you protect yourself by putting on gloves and other protective clothing for safety measures.
ii. Check the state of the wheels in the car if they are old, you replace them since they cause the clicking noise.
iii. Check the state of the tires if they are old, their communication with the steering wheel will be poor, causing the clicking noise. Ensure you check the tires and replace them immediately. If you work with the tires and rotation, but there is still the clicking noise, consider moving to the next step to fix some other parts.
iv. Check the bearing of the car. There are different types of bearing within the vehicle. Therefore, if the noises persist, consider checking the approach. If the path is old, there will be a clicking noise resulting from the transmission of fluids. The only solution here is to remove the old direction and fix a new approach on them.
v. Consider lubricating some parts of the car like the gear and wheel with oil. A clicking sound can result from low fluids in equipment, showing that the internal components are not lubricated. Therefore you must lubricate the parts properly to a good extent.
Consider checking the features that have effects of friction and fix them immediately to reduce the occurrence of excess damages. Start the car and test to identify the production of the clicking sound. If the problem persists, proceed to the next step.
vi. If you try all the steps and the clicking noise persists, consider consulting a technician to help check the issue with your car and fix them immediately.
Causes of the clicking noise in 2011 Hyundai when turning
1. Drifting the wheel when turning
When running the car and turning the wheel, you must follow a straight path on the road for proper movement. However, you can turn the car and hear the clicking noises, which shows there are faults within. When you have a drifting wheel, and you are turning the car, it is evident that the vehicle will make a clicking noise since you can be having a faulty rack that causes the wheel to wander, causing the noise.
2. Faulty bearing
If there is a clicking noise, but the clutch is okay, then the issue is with the bearing. Noises from the direction occur when you are working with the grip other than driving that you apply pressure on the clutch. Therefore when the approaches tend to be old or faulty, you can check them and replace them with new ones. The bearings include the throwout bearing and the input shaft bearing. The wheel bearing can also cause noise through the transmission of the fluids while driving the car.
3. Stiff steering wheel
Steering the wheel in the car helps the driver to turn in the direction without much struggle quickly. So if the car’s steering wheel is stiff, it means it will be hard for the driver to turn the vehicle or that there must be much force to turn the car.
The application of coercion arises when the car’s steering wheel is stiff which causes a clicking noise when turning. Therefore, if you hear the clicking noises when turning the vehicle, consider checking the state of the revolution that sometimes is stiff that when you turn the car, it causes such noises.
4. Failing constant velocity
Failing constant velocity with the car can cause grinding, clicking, and rumbling noises when turning the vehicle. The continual momentum allows the front wheels to receive power to move on such that when the constant velocity joints fail to work correctly, it shows the parts are old and loose that they cause the clicking noise.
5. Old steering wheels and tires
After prolonged use of the car, the parts will be old since you can be using them for long and excessively that the parts wear out. Remember, the steering wheel works together with the tires to cause the movement, and when some features are old, there will be no communication between the two regions.
Therefore, when the tires are old, the steering wheel is loose, and you are turning the car, there will be increased production of the clicking noise that you will have to replace the parts to reduce the noise.
Momo is a famous name among steering wheel makers and the Heritage Indy is a beautiful, simple design that harkens back to the roots of the company. Italian race driver Gianpiero Moretti founded the company in 1964 and this wheel would look right at home in any of the sleek sports machines of that era. The wood is genuine mahogany with a glossy finish, there are finger grooves on the backside of the wheel, and the spokes are drilled aluminum. The Heritage Indy isn’t cheap but you absolutely get a quality product and thing of beauty for the outlay. Source: forbes.com
Frequently asked questions:
- What causes clicking noise in a car when starting it?
When you hear the clicking noise in a car when turning it, the cause can be the battery that causes high resistance or low voltage. If the battery is okay, then the issue is with the alternator that fails to work correctly. Sometimes the starter can also have problems that cause the clicking noise in your car. The battery problems are major since they have terminals that can have rust, the battery can be flat, and cannot start the vehicle.
Conclusion
Clicking noise in any car is a normal noise that shows the vehicle is working. However, when you hear repeated clicking noises, you must worry since the car has some issues. When you hear the clicking noise when turning the vehicle, the problem is mainly with the wheels and tires. The article contains the causes of the clicking noise and the steps for fixing them.
Follow the article carefully to correct the clicking noise in your car when turning. Remember to follow the manufacturer’s instructions when fixing the problems in the vehicle. You can also consult a technician to help improve some issues with the car.
Related Posts:
- Why does my 2011 Hyundai sonata engine make noise
- How to troubleshoot the 2011 Hyundai sonata steering column that makes noise
