When you notice a knocking sound in your 2011 Hyundai sonata twisting the steering column, consider it your 2011 Hyundai sonata speaking to you. It’s informing you that there’s a problem that needs attention. In rare circumstances, it may indicate that you require a new jounce bushing. In some cases, it may suggest that you require a new tie rod.
You don’t want to reject what your 2011 Hyundai sonata is attempting to say to you, irrespective of what it is trying to tell you. You inspect your 2011 Hyundai sonata by a reputable mechanic as soon as possible. They can suggest the appropriate fixes to eliminate the knocking noise when rotating the steering wheel. It will now make your automobile quieter while you drive it.
Luckily the article shows the common causes of the 2011 Hyundai sonata steering column noise. Below the reasons are some ways you can fix each cause. Ensure you follow the steps of the 2011 Hyundai sonata carefully to get accurate results.
Steps on how to fix the steering column noise
Tools necessary
- A screwdriver.
- Gloves.
- A wrench.
- Replacement parts e.g., a new steering column if faulty beyond repair.
After that, follow the steps below;
1. Stop the car and check all parts. Identify the reasons why the Sonata makes noise.
2. Determine whether or not your vehicle leaks.
3. If there is, get it replaced as soon as possible, so you don’t have to travel around with almost any power steering fluid in your 2011 Hyundai sonata.
4. Replace the old, damaged control arm bushings as soon as possible, just like you did with the jounce bushings. You’ll keep hearing that until you address the problem with your control arm bushings. If you ignore a problem like faulty control arm bushings, you can find that your 2011 Hyundai sonata develops further issues.
5. Replace your power steering state’s filter so that power steering oil doesn’t back up in the tank.
6. Change the struts and shocks, which is your only alternative.
7. If the issue persists, consider replacing the whole steering column or seek help from a professional mechanic.
Common causes of the steering column noise and how to fix it
Whenever you detect an odd noise when rotating your steering wheel, it’s nearly tough to determine the specific issue you’re encountering. When twisting the steering column in an automobile, several items can generate a banging noise.
The information below is the most prevalent reason for a knocking sound when rotating the steering column in a 2011 Hyundai sonata.
1. Power steering fluid is spilling
Power steering devices are included in all newer 2011 Hyundai sonata s and are meant to help individuals drive their 2011 Hyundai sonata without difficulty. Power steering oil travels through these systems to support greased things and give the correct pressure for simple steering column operation. To make this operation feasible, this oil travels from a specific tank to an automobile’s steering rack and pinion.
However, this power steering fluid does not always stay in place. It may start to seep out of your 2011 Hyundai sonata at some point, posing an issue for you. It would not be easy to utilize your steering wheel if you have enough power steering fluid in your 2011 Hyundai sonata. It will also cause your 2011 Hyundai sonata to emit noises that you may have never heard before.
2. Bushings on the Control Arms Have Split
When your automobile starts generating strange noises, these aren’t the only bearings you’ll have a concern about. On the other hand, control arm bushings might wear out and crack if they are not changed. Most users are aware of the experience of knocking sound when moving the steering wheel caused by these bushings.
3. Ball Joints That Don’t Work
If this is the case, you may have a problem with the ball joints that govern your steering knuckles and control arms. These ball joints need oil to function correctly, and if they don’t get it, they’ll start to dry out and make various noises when riding.
Over several weeks, these noises can also get progressively louder. Ball joints will only get dryer as time passes as they start to dry up a tiny bit. So if you’re not attentive, they can begin to crack and fall on you. Changing them may be the answer to disposing of the noise.
4. The steering column bearing is wearing out
Many things that can generate a knocking sound when moving the steering wheel in your 2011 Hyundai sonata are below your 2011 Hyundai sonata. Because this part will be nearer to you, you may spot an issue with it more easily. The component is the upper bearing on your steering column.
If indeed the upper bearing on your steering wheel begins to wear out, the rear of your steering column will grind against the cowling on your steering wheel. When you crank the wheel, you may hear a loud grinding noise or maybe a slight knocking. It may even make turning the steering wheel more complicated than it needs to be at times.
5. Decided to back Reservoir for Power Steering Fluid
The power steering oil in your 2011 Hyundai sonata is held in a dedicated tank until it is necessary by your power steering system. A filter usually is present in that tank to ensure that your power steering oil remains pure. But there’s a catch: the filter can block up with time, causing the entire tank to back it up. When there’s a blockage in the pump, the power steering fluid won’t flow freely.
As your power steering oil is updating, your 2011 Hyundai sonata’s steering column may create a knocking noise when you twist it. It may also make turning your steering wheel difficult in the first position.
6. Shocks and struts that aren’t working
You won’t have to worry about changing the shocks and struts as frequently as you would your brake discs and rotor. However, struts and shocks in an automobile will wear out over time and will need replacement. A knocking noise when moving the steering column in your 2011 Hyundai sonata is one of the earliest indicators of all this.
When you spin your 2011 Hyundai sonata, your struts and shocks will start to make noises, signaling that it’s better to upgrade them. If you don’t take action, these pieces will begin to cause your automobile to bounce up and down every time you drive it. It won’t be long before moving around in your car becomes unbearable for you.
Frequently asked questions:
- Can worn-out tie Rods in the 2011 Hyundai sonata cause steering column noise?
The tie rods in your 2011 Hyundai sonata’s steering wheel are responsible for moving your wheels in the way you want them to go when you move them to the left side. As a result, the tie rods must be in good functioning order at all times.
You may have ancient tie rods that are starting to fail if you notice a banging noise when moving the steering wheel in your 2011 Hyundai sonata. As your tie rods wear out, they can make various sounds like rattling and groaning.
Like a bad power steering rack, defective tie rods are most likely to cause problems when you’re turning your automobile at low speeds. If you hear your automobile knocking or producing other sounds at low rates, have your mechanic check your tie rods to see if they need replacement.
Conclusion
If your 2011 Hyundai sonata makes noise, especially in the steering column, use the information above to solve the issue. Also, follow the manufacturer’s instructions. In case of any questions, contact a mechanic.
Finally, service your 2011 Hyundai sonata more often. Remember to refer to the manufacturer’s manual guide to help you fix the issue faster. Be careful when handling the 2011 Hyundai sonata components to reduce risks of damage.
Related Articles:
