Acura TL Wheel Bearing Noise-How to Fix

If your wheel bearings are making loud noise when in use, it is probably a sign that the wheel bearing is failing or malfunctioning. There are several reasons why the wheel bearing may fail to function, and they include the following; the brakes are faulty and misalignment of the vehicle tires, among others. If your Acura starts making wheel-bearing noise, it is essential to fix the issue immediately rather than ignoring it.

Any noise from the wheel bearing noise is common and affects many drivers. Don’t worry. You can fix the issue on your own as long as you have all the essential steps. First, ensure you have all the materials that are essential such as the screwdriver, among others. Remember to review the manufacturer’s manual guide and ensure you follow the correct steps.

Fortunately, the article below shows some of the steps you can use to solve the Acura TL wheel-bearing noise. Also, see some reasons why the Acura TL keeps making noise. In the end, there are FAQs concerning the Acura TL wheel bearing. Therefore, ensure you review the article below and obtain all the knowledge of solving the issue.

Steps on how to fix the Acura wheel bearing noise

Step 1: Collect all materials necessary

The materials include the following;

Wrench.
Jack stands.
Flathead screwdriver.
Torque wrench.
Pliers.
Hammer.
Slide hammer.
Philips head screwdriver.
Ratchet.

Step 2: Place the car on a level, flat surface

Stop the wheel on the other side of the rotor you’ll be operating on initially with a tire jack.

Step 3: Pull the front brakes

The positioning jack stands underneath a substantial, such as the chassis engine mount, when jacking up the car. Take the tires and rotors from the front of the vehicle. Take the two bolts that keep the brake line in position and pull them out of the path.

To stop harming the brake caliper, take the two screws and hang the caliper with a wire hanger. With an impact wrench, take the two Phillips head screws that attach the rotor to the axle. If the wheel has rust on, offer it a few moderate knocks all around with a sledgehammer to pry it free, or exert pressure and force it off using two bolts put into the drilled openings. Disconnect the bolt that secures the sensor.

Step 4: Uninstall the hub from the steering wheel

Using a slide hammer, you can remove the hub before using a hydraulic pressing to install a new bearing. You could, nevertheless, remove the entire steering knuckles and axle and take it to a repair altogether.

Keeping the hub intact won’t cost you much more to have the replacement bearings put in. You’ll remove the wheel, as well as the spherical joint and link rod end, from the vehicle.

Step 5: Replace the wheel bearing

Unlock the ring secure the wheel nuts with a flat head screwdriver and a hammer, then replace the screw with a socket and breaking bar or contact tool. Extract the bottom ball chain’s cotter keys and nuts, as well as the rear suspension end’s culvert pins and nuts.

To remove the component, use a hammer and pickling fork extraction tool. Make a note of where the steer knuckles screws are on the column so that you can approximately balance it after reassembling it. Disconnect the hub assembly from the axle by unscrewing the remaining two screws that fasten.

Step 6: Change the front wheel bearings

Push the steering knuckles firmly to restore the screws and carver nails once you place the new wheel bearings and reassemble the hub. Remove the hub knob and torque it, then hammer and smack it into position. Remove the sensor, wheel, brake caliper, and braking line and replace them.

Steps on how to diagnose the Acura TL bearing noise

If you hear some noise emission from your Acura TL, use the steps below to find the root cause of the issue.

Tools necessary

Jack stands.
Replacement wheel bearing.

1. Wiggle and Jack

While your Acura TL is on jack supports, check whether the tire is moving at the bearings. If it is, you are in desperate need of a replacement wheel bearing. If it doesn’t wobble, it doesn’t necessarily mean the wheel bearing is in good shape.

2. Take a test drive

Taking your Acura TL for a spin is the most excellent approach to detect bearing noise. As the speed increases, you should notice the humming rise.

3. Check for any faults by shifting the tire position

You should also turn the tire to hear if there is any noise coming from the bearing.

Signs and symptoms of a Faulty Acura TL wheel bearing

The following signs and symptoms will enable you to identify a wheel bearing that is failing or malfunctioning. Be careful and see if the symptoms below exist.

i. When you turn the wheel, the noise from the bearings usually gets worse. It is especially true when the front bearings are malfunctioning.

ii. With increased speed, the sound becomes louder. As the speed of your Acura TL increases, problematic wheel-bearing noise will usually rise as well.

iii. Noises. A lesser grinding sound is the most constant sound a faulty wheel bearing will make. The wheel or tire area should be making this noise.

iv. Extra Time. It might feel very different if you have a bad wheel bearing. As the bearing wears out, the tire will move in the directions it was essential to go. As you turn, accelerate, and brake, this essentially affects the wheel alignment.

Frequently asked questions:

How do wheel bearings work?

A wheel bearing system comprises moving parts that move everywhere on solid steel bearings tracks. The wheel bearings support front and back axles and the entire mass of your Acura TL. The pieces utilize a rising process and highly durable iron to resist all of the regular blows that the wheel and tire combination encounters as you drive past.

Is it okay to drive with an Acura TL faulty wheel bearing?

No. Wheel bearing breakdown usually is progressive, although that can happen suddenly following a spectacular collision between the tire and wheel combination and a large hole. Wheel bearings often can generate noise for an extended period before a disastrous failure, causing the tire and wheel combination to separate from the shaft.

Overall, the danger of unexpected failure rises with noise exposure. But, technically accurate, it is impossible to estimate when a bearing will fail after it has begun to deteriorate.

When should I replace my Acura TL wheel bearings?

Replace the wheel bearings when;

The wheels and tires fail to function as usual.
Rising vibration in the vehicle’s steering wheel.
Too much noise, especially the grinding noise from the wheel and wheel bearings.
Radial play in the wheel hub once igniting the vehicle.

Conclusion

If your Acura TL wheel bearing keeps making noise, you can use the information above to solve the issue successfully. It is simple, follow the steps above, and you will obtain positive results. Also, remember to review the manufacturer’s manual guide and try not to damage other parts.

Finally, take some precautions when using your Acura TL wheel-bearing noise. For example, service your car more often to prolong its lifespan. Also, check the wheel bearings more often and correct them immediately if faulty before the issue persists.

I tried to point out all the possible solutions in this article. Now it’s your turn. I’d love to know that is this helps you out or not.

Related Articles: