Changed Wheel Bearing Still Making Noise- What to Do

Changed wheel bearing still making noise how to fix
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.

We all know that when the wheel bearing in the car has faults, the vehicle will not run appropriately, and it can easily cause accidents with it. The bearings always fit in the wheels since they have a hub that they fit in. The wheel bearings are different depending on the type of car or vehicle you are using since the wheels differ with the kind of car and its size.

The wheel bearings sometimes can make noise in the car that you should fix immediately to avoid further damage to the whole system. However, you can select the problem with the wheel bearing noise, but it is still making noise. In this case, you need to check the state of the new bearings you are using since the noise can result from poor installation of the bearings that are not working as expected.

The article below shows the possible causes of the noise after changing the wheel bearing and how you can fix the issue.  The frequently asked questions are typical questions about the wheel bearings, and lastly, the conclusion summarizes the whole article.

How can one fix the faulty wheel bearings?

How can one fix the faulty wheel bearings

After checking for the possible causes of the noise, you can now fix the problem.  Remember, in this case, the wheel bearing is the primary cause of the noise in the car. Follow the steps below to select the noise:

Tools needed

i. Buy the correct type of wheel bearings you will use to replace in the car

Buying the right tools helps to avoid using a wheel bearing that is not correct since it will cause noises.

ii. Identify the cause of the noise

Diagnose the cause of the noise by driving the car while increasing the speed.

iii. Check the state of the wheel bearings

 If they are wrong or old, consider replacing them immediately. Remember, failure to replace the wheel bearing can cause further damage to the areas around it.

iv. Lubricate the wheel bearings

Ensure the wheel bearing has enough fluids to rotate smoothly without facing difficulties that can cause the noises.

v. Inspect the car tires

Check the state of the car tires if the tires are old, they can cause wheel bearing noise. Replace the tires if they are senior to reduce the noise.

vi. Test the car

 To check if it has more noises and fixes them if it still has. In such a case, consider consulting a technician to help you select the issue with the car.

vii. Provide a proper installation of the wheel bearing

Ensure you install the wheel bearing in the correct position and that the connection is tight.

Causes of noise from a changed wheel bearing

changed wheel bearing still making noise

Wheel bearings allow the wheels to rotate with less friction when driving the car. The wheel bearing noises result when stopping, and the bearings start to cool which can cause noise when there is an issue with the wheel. The wheels contact the surface when the car is moving, which can cause some noises when the vehicle is moving from the wheel bearing. Below are the causes of the noise from a changed wheel bearing

Replace Rear Hub Bearing On Lincoln
Replace Rear Hub Bearing On Lincoln

1. Poor installation of the wheel bearings

When you have fault wheel bearings, you can hear the noises in the car so you decide to change the wheel bearings you will use to reduce the noises. However, after changing the wheel bearings, you notice the noise from the car is still there, and you have worries about what to do. Sometimes you can fix the new wheel bearings, but the connection is so loose that it will still make noise in the car when driving.

Therefore when changing the wheel bearings, ensure the connection is tight between the wheel and the bearings to prevent noise. If you find it hard to install the new wheel bearings, consider consulting a technician to help you fix them since you can fix them again, but the bearing is still loose.

2. Misuse of the wheel bearings with the driver

When you fix new wheel bearings, but there are still noises in the wheel, consider checking where you are driving the car. When you move the vehicle in deep waters, the wheel bearings will fail to work, and after some time, they will start making noise.

All this is because the wheel bearings in the car have a design that pressure can leave the wheel bearings where the manufacturers fix it with a lubricant.  The lubricant cannot prevent the entry of water. Driving the car in deep waters, the water can go through to the bearings that it mixes with the lubricant causing failures in working the bearings.

3. Poor roads for driving the car

When you change the wheel bearings, ensure you handle the car properly so that it cannot cause the noises again in the car. Remember wheel bearings receive pressure with the weight of the vehicle that if you drive on poor roads like roads that are bumpy or have holes, they can quickly get damaged.

So even if they are new, they can still start making noise.  The bearings can get imperfections when the car hits something that the bearing balls will get misplaced from their positions, and they cannot rotate the wheels correctly.  Therefore, use the vehicle with the right driving areas, and if you continue driving on poor roads with faulty wheel bearings, the car can have more damage.

4. Imbalances in the tires

The car’s wheel depends on the wheel bearings and vice versa.  Therefore, when the tires are imbalanced, they can cause other damage to the rest of the parts in the wheel, causing noise with the wheel bearing.

5. Use wrong wheel bearings with the wheels

When replacing the wheel bearings, consider choosing the correct wheel bearings for the car since different kinds of wheels differ with the type of car. So the difference in the types of the vehicle causes a difference in the wheel bearings to use. Therefore, fixing the bad wheel bearings in the car will cause noises because they are not working correctly in the vehicle or forcing them to work in the car.

Frequently asked questions:

  • What are the different types of noises from a bad wheel bearing?

Humming noise: humming noise from the car can result from issues with the tires, the wheel bearing, and the CV joint. Before troubleshooting the problems with the wheel bearing, it is good to know the type of noise it is making to find the correct solution for the problem.

Squealing and growling noise: squealing noise results from a bad wheel bearing that can change proportionally to the vehicle’s speed. A squealing noise can grow and be louder if you fail to fix it.

A howling noise occurs during deceleration that indicates there are loose parts in the wheel bearing.

Conclusion

Wheel bearing noise is a great thing that you must avoid in your car such that when you drive with it can affect the state of the vehicle. The article below shows the signs of a bad wheel and causes the wheel bearing noises that you need to fix immediately.

Follow the article carefully to correct the clicking noise in your car when turning. Remember to follow the manufactures instructions when fixing the problems in the vehicle. You can also consult a technician to help improve some issues with the car.

Related Articles:

Categories Car

Leave a Comment