Chevy Cruze Ticking Noise- Causes With Fix

Chevy Cruze ticking noise how to fix
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.

When using the car, you always need a very comfortable environment to enjoy your journeys’. However, when you are driving, then you hear the ticking noise. It is very annoying that you stop moving since it is uncomfortable. When going, the ticking noise from the car feels like the car is burning up, and it will not work anymore. If you hear such noises, consider fixing them earlier before they cause more significant damage to the vehicle.

Therefore, when you have a Chevy Cruze with ticking noise consider checking the filter. A filter is the primary culprit of the ticking noise in the car that you need to check before troubleshooting the Chevy Cruze. A filter contains the rod and oil that can have issues causing the noise. There are symptoms of a lifter that has problems that you can easily recognize and fix immediately.

The article below shows the causes of the ticking noise in the Chevy Cruze. Since a lifter is the primary cause of the ticking noise, I will briefly provide the lifter’s symptoms that have easy identification when using the article. Then there will be the frequently asked questions and lastly, the conclusion, which summarizes the whole article.

How to curb the ticking noise in the Chevy Cruze

chevy cruze ticking noise

To curb the ticking noise in a Chevy Cruze, first, consider replacing the lifter since it is the primary cause of the ticking noise in your car. Remember, the process of working with the lifter requires much cash since you need to work with a technician that you will pay, and you will have to purchase a new lifter for replacement. The steps to fix the ticking noise are as follows:

i. Gather all the requirements

When carrying out the troubleshooting process, you need some requirements to help you fix the parts with ease and open on the internal factors faster. The essentials you need include the

  • New parts for replacement.
  • Screwdriver for opening the parts.
  • Magnetic kit to store the screws

ii. Check the lifter issues

Add oil that has less fat in it. If the lifter is faulty, consider replacing it. Remember, when one lifter needs replacement, you will have to replace all six lifters simultaneously. Correct all the bent pushrods and change the oil if it is terrible.

iii. Check the exhaust system

Check the exhaust system if it has leaks consider replacing the parts with leaks. Remember, the exhaust has many parts that can cause faults; therefore, consider checking the parts carefully and fixing them responsibly.

iv. Check the bearings

Check the bearing and replace them to reduce the ticking noise. The bearings can cause noise from the wheels that can even hinder the movement of the car. Change the valve or tighten it, if it is loose, and fix the timing chain too.

Check any other parts in the Cruze to identify the parts that can be faulty and cause the noises. It is good to diagnose the whole car to check the errors and fix them.

Causes of ticking noise in the Chevy Cruze

Causes of ticking noise in the Chevy Cruze

1. Bad lifter

When the lifter is terrible, it will fail to work, causing the ticking noise since it is the primary cause of the ticking noise. Working with the lifter needs professionals since you are working with some parts of the engine. Therefore, when the lifter is terrible, consider replacing it by consulting a technician because replacing the lifter requires the removal of some parts of the engine that needs excellent handling of the machine.

2. Bent pushrod

Bent pushrod

Some people ignore the pushrod and do not understand when to use the rod in the car—pushrods are found in the engine where the camshaft is located around the engine block. The primary function of the pushrods is to connect the camshaft to the lifters. Therefore, if the pushrod is bent, there will be a ticking noise since the connection between the camshaft and the lifters will be loose.

3. Lack of enough oil in the lifter

A lifter can tick if it lacks enough oil due to friction of the lifter and other parts connecting to it. When you experience such issues, consider checking the level of oil in the lifter such that when it has less fat, you can reduce the ticking noise in it.

Protect your engine from damage!

During combustion, both dirt particles and combustion residues can penetrate into the engine oil. Without the appropriate oil filter to reliably keep these residues out of the engine oil, the engine can no longer be reliably supplied with clean engine oil and is thus no longer properly protected from wear. Not changing the filter at regular intervals risks reduced performance and increased oil consumption. In the worst case, this can even lead to engine damage.

4. Nasty or dirty oil in the lifter

The oil that the vehicles use differs according to the type of engine they have. Sometimes the oil you are using in the filter is not the correct type of oil that can cause the ticking noise in the car. Therefore, check the type of oil in the lifter to ensure the vehicle is using the right oil. If the oil in the lifter is terrible, consider replacing the oil since changing the oil is an easy and cheaper task that you can carry out.

Citroen C3 Diesel Chuffing noise fr...
Citroen C3 Diesel Chuffing noise from engine -ticking noise-

5. Leaking exhaust system

Apart from the lifter, you can also check the exhaust system that can cause the ticking noise. When the exhaust system leaks, it will make a ticking noise that some refer to as a ticking sound.

To check the leaking place with the exhaust system, check the bolt areas that connect it to the block at the exhaust and check if the bolts are loose and allow the leaking of gases and oil causing the noise. Spreading the exhaust system is the most common source of ticking noise in most cars.

6. Valve lash

 Valves in the car differ depending on their make since some are self-adjusting while some require adjustments periodically. When you are adjusting the valve lash, you are changing the tension on the rocker arms. Therefore, it is good to check the adjustments with the valve if they are loose, they can cause the ticking noise that you may think it is with the issues with the filter.

7. Stretched timing chain

 A loose timing chain causes the ticking sound in any car since when you start the car, the timing chain starts too, and when it is open, it will tick. You can quickly notice that the timing chain is loose when you start the car and sometimes when moving. Remember, when the tensioner is faulty, it will leave the chain open and ready to jump a tooth or fall off all the ways.

8. Bad bearing

If there is a ticking noise, but the clutch is okay, then the issue is with the bearing. Noises from the direction occur when you are working with the grip other than driving that you apply pressure on the clutch. Therefore when the approaches tend to be old or faulty, you can check them and replace them with new ones. The bearings include the throw-out bearing and the input shaft bearing. The wheel bearing can also cause noise through the transmission of the fluids while driving the car.

Frequently asked questions:

  • What are other types of noises in the car apart from the ticking noise?

There are many noises that the car does make when you are driving. Some of the noises are normal since they show the vehicle is working correctly. Humming noise in the car is normal unless it turns out to be loud. However, there are also clicking and rattling noises not expected.

Conclusion

When driving the car, there must be possibilities of the ticking noise that you need to fix. The article shows causes of ticking noise in the Chevy Cruze that are primarily with the lifters and the exhaust system. Sometimes when there are loose parts in the car, and you are driving, you will hear the ticking noise. There are steps too that you can follow when troubleshooting the ticking noise in the vehicle.

Therefore, consider correcting the problems with the ticking noise in the car before they cause more significant damage to you. Always follow the manufacturer’s instructions before trying out anything. Choose to consult a technician in the troubleshooting process to help you work with the engine since it needs professional handling.

Related Article:

Categories Car

Leave a Comment