Washing Machine Making Noise When Filling With Water- What To Do

washing machine making noise when filling with water
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.

The washing machine produces noises when filled with water due to many reasons. It is usual for the washing machine to make noise because water is always creating a humming noise flowing. When a washing produces a noise when filling with water, be keen to know the cause of the noises as they may turn out to be worse and damage the washing machine.

Troubleshooting the problems helps the washing machine work effectively by cleaning clothes well, reducing the noise that destroys the house, and reducing the washing machine’s electrical bills for cleaning. The article shows the causes of noises, types of noises, and how to fix the noises to normal if they turn out loud.

Causes and solutions of noises the washing machine makes when filling

Noisy washing machine

Misplacement of the door seal

The door seal misplaces itself when it gets old as it can lose its shape hence making noises as it pats with the drum when filling the washing machine with water during the washing process. When the noises become loud, the drum has an issue with the door seal as they might be rubbing against each other.

To solve this problem, seal the door properly to prevent it from becoming loose, causing it to rub the drum. If sealing the door is not making changes, the door needs a new seal, replacing the seal.

Faulty belt

Faulty belt

The belt connects the pulleys and the motor that drive the washing machine to wash and drain the dirty water; when the belt is faulty, water strains pass through to the washer, making noise. If the belt is defective then replace it with a new one. 

Faulty valve

Washing machine Faulty valve

Valves connect the washing machine with the water hoses. There are different types of valves in the washing machine; a solenoid valve is an electronic water outlet. The solenoid valve helps the washing machine switch off and on at the times of the water supply. So if the valve is faulty, the washing machine will make noise when filling with water.

To check the issue with the valve, remove it from the washing machine, check the problem with it, and then replace it whenever necessary.

Defective lock of the door in the washing machine

lock of the door in the washing machine

When the water machine is filling with water, and the door keeps opening and closing unnecessarily, then the washing machine makes noise since the door will keep opening and closing as it is faulty.

Change the defective door or repair it to prevent noises from the washing machine.

Read More: Samsung Washer Making Noise During Spin- Easy Solutionsduring spin.

Clogged debris in the tub and drum

When debris gets stuck in the tub and drum, the washing machine makes noise when filling with water as the water passes through the waste and the dirty particles rub them up, producing noise.

Always clean the tub and the drum to solve noise from this area since the dirty particles can block the tub and prevent water from flowing through into the washing machine.

Defective bearings

Bearing helps in the rotation of the drum in the washing machine, an. As they become defective after working, old bearings will make noise in the washing machine when the drum is spinning. To check the bearing, feel the movement of the drum with bare hands.

To solve the issue, replace the bearings for effective spinning of the drum.

Loose counterweights

Counterweights are parts in the washing machine that ends the cycling process. The counterweights get damaged due to the vibrations of the device when washing. Failure to check the washing machine causes louder noise in the house when cleaning.

Therefore, to maintain the bearings, consider checking them, tightening the loose parts, and replacing a bearing with extreme damages.

Old shock absorbers

Shock absorbers in a washing machine lower the rate of vibration when washing where the tank vibrates when filling with water. So when the shock absorbers are faulty or old, they do not maintain the washing machine’s stability, making it produce noise when filling with water.

The old shock absorbers need replacement if they are old, and in case they are still new but are causing noise to modify its stability till it well supports the washing machine.

Defective motor

A motor helps power the machine to spin when washing clothes. In this process, water is filling the washing machine. When the engine is faulty, the washing machine will make noise when filled with water.

The motor, therefore, needs replacements to shut these noises from the washing machine.

Faulty pulley

The pulley helps the belt move when filling the washing with water and when the washing machine is working. If the washing machine is making noise when filling with water, then the pulley has been damaged. Moreover, the washing machine can produce a smell that seems like there are parts in the system that are burning.

In case of such signs, the pulley needs a replacement for the adequate performance of the washing machine.

how to fix a washing machine making noise when filling with water-step by step guide

washing machine filling with water

1. Read the manufacturer’s instructions on how to handle the washing machine and some basic knowledge. Then, you can call a professional if you are getting the point.

2. Switch off the washing machine by unplugging the power cables to avoid electrical damages to the user when troubleshooting. Please turn off the machine immediately you realize it’s misbehaving to prevent further injuries.

3. Open the washing machine system by removing all the screws from the upper surface to access the inner parts.

4. Inspect the washing machine parts by opening and checking the state of each part.

5. Replace worn-out parts with new parts; avoid replacing the washing machine with older parts that may be defective.

6. Remove clogged debris in the tub and drum that prevent water flow to ensure everything is clean.

7. Set the washing machine to a level that balances with the ground to avoid washing when vibrating.

8. Replace the older belt that gets worn out faster than other parts.

9. Put back every part to its position and fix them tightly to prevent noise from loose parts rubbing each other.

10. Put the upper surface back and fix the screws tightly to prevent the opening of the covers when the washing machine is vibrating.

11. Connect the cables back to the main switch and turn on the washing noise to confirm if the noises still exist. In case they are still there, consider consulting a technician to help fix the washing machine.


When filling the washing machine with water, it tends to make some kinds of noises like squealing, banging, knocking, scratching, and bumping, showing that the washing machine is working, but it turns out to be louder as the parts wear out, meaning the device needs repair. The article shows the causes of noises and solutions, and it provides the steps to follow when troubleshooting the problems in your washing machine.

Follow the manufacturer’s instructions when checking the issues with your machine and when doing the replacements to avoid damaging delicate parts that are expensive to repair. Then, contact a technician to help fix the troubles you are unable to resolve.

Leave a Comment